Mold-Tek Packaging Limited - Company overview

Mold-Tek is a listed public limited company, first registered with ROC Hyderabad on 28 February 1997.

1997-02-28 Hyderabad, Telangana Active Listed Active Compliant
Connect MCP

Key Metrics Public MCA facts are exact. Revenue, profit, assets, and employee figures may show as ranges until unlocked.

REVENUE
₹500–1000 Cr
▲ 12.0%
FY 2025
PROFIT / LOSS
₹50–100 Cr
▼ -9.1%
FY 2025
EBITDA
₹100–500 Cr
▲ 8.0%
FY 2025
NET WORTH
₹500–1000 Cr
▲ 7.3%
FY 2025
TOTAL ASSETS
₹500–1000 Cr
▲ 14.3%
FY 2025
EMPLOYEE COUNT
891–900
OPEN CHARGES
13
177.00 cr
PAID-UP CAPITAL
16.61 cr
AUTHORISED CAPITAL
20.00 cr
COMPANY AGE
29 Years 8 Months
since 1997-02-28
LAST FILING WITH ROC
2025-03-31
Last AGM: 2025-09-30
ACTIVE GST
11
Updated: 2026-01-08 20:03:47
TOTAL MONEY RAISED
₹100–500 Cr
SATISFIED CHARGES
9
96.10 cr

Company Health Scores Scores from 0–100 based on filings, compliance signals, financials, and board history on this profile.

Health scores for Mold-Tek covering vendor trust, statutory compliance, financial health and director risk - derived from MCA filings, GST and EPFO records, financial statements and the company's board history.

Vendor Trust Score Low risk
78/100
Overall counterparty comfort for vendors and customers.
  • Blend of compliance (44), financial health (95), director (95) and company-foundation signals.
  • Operating for 29+ years.
Compliance Score High risk
44/100
Statutory filings, status and regulatory flags.
  • Company status is Active as per MCA.
  • Last balance sheet filed for Mar 2025 - slightly behind.
Financial Health Score Low risk
95/100
Profitability, leverage and liquidity from filed statements.
  • Profitable in FY 2025.
  • Positive net worth.
Director Risk Score Low risk
95/100
Board strength, DIN status and churn.
  • 12 directors on the board.
  • No disqualified or deactivated DINs on the current board.
Scores are derived from MCA filings, financial statements and public records on this page. Higher is safer. They are indicative, not a credit rating.
360° Intelligence Report: trust score, financial health, credit risk, growth & distress signals - auto-generated from filings. View report →

About Mold-Tek Company identity, industry, contact, and registration details from MCA and company records.

Mold-Tek is a listed public limited company, first registered with ROC Hyderabad on 28 February 1997. Its registered office is at 8-2-293/82/A/700, Ground Floor Road No 36, Jubliee Hills, Hyderabad, Telangana. Earlier names on record include Tresure Paks Private Limited, Tresure Paks Limited and Moldtek Plastics Limited.

Its filings describe the main line of business as plastic products, non-metallic mineral products, rubber products, fabricated metal products, which made up 100% of turnover.

It has 12 directors: Srinivas Madireddy, Togaru Dhanrajtirumala Narasimha, Ponnuswamy Ramnath and 9 others. The longest-serving is Venkateswara Rao Pattabhi, on the board since 2008; the most recent to join is Ponnuswamy Ramnath, appointed in August 2023. Lakshmana Rao Janumahanti is the managing director. 15 former directors are on record; the most recent to leave was Mytraeyi Janumahanti in September 2021. Between them, the directors also sit on the boards of 5 other companies, including Mold-Tek Technologies Limited and Cgi Simulations Private Limited.

Paid-up capital stands at ₹16.61 crore out of ₹20 crore authorised. The last AGM on record was on 30 September 2025, for accounts made up to 31 March 2025. 13 charges (secured loans) are still open, with Citi Bank N.A. among the lenders, and nine more have been paid off. Its shares trade on BSE (533080) and NSE (MOLDTKPAC).

Packaging ••••••••
  • Location 8-2-293/82/A/700, Ground Floor Road No 36, Jubliee Hills, Hyderabad, Telangana - 500033
  • Website moldtekpackaging.com
Name History
Legal NameMold-Tek Packaging Limited
CIN / LLPINL21022TG1997PLC026542
Company No.026542
Stock Symbol BSE: 533080 | NSE: MOLDTKPAC
ClassificationPublic Limited Indian Non-Government Company
Incorporation Date1997-02-28
Date of AGM2025-09-30
Date of Balance Sheet2025-03-31
Listing StatusListed
ROC CodeRoc Hyderabad
Credit RatingA1 (Icra)
PAN
LEI Number
Active ComplianceActive Compliant

Current Directors of Mold-Tek (12) Current board members from MCA filings, including designation and appointment details.

S
Whole-time director | Since 2018-05-14 | DIN: 01311417
T
Director | Since 2020-01-27 | DIN: 01411541
P
Director | Since 2023-08-17 | DIN: 03625336
S
CFO | Since 2015-01-01 | DIN: 01784830
M
Director | Since 2020-03-11 | DIN: 08715322
V
Whole-time director | Since 2008-08-27 | DIN: 01254851

Financial Performance of Mold-Tek Bands and Low / Medium / High trend shape. Exact figures unlock with your report.

Estimated bands · FY 2025
Revenue ₹500–1000 Cr ▲ 12.0%
P&L ₹50–100 Cr ▼ -9.1%
EBITDA ₹100–500 Cr ▲ 8.0%
Net worth ₹500–1000 Cr ▲ 7.3%

Exact figures and labelled charts require an active report plan.

Verified entity values are shown only after access is granted.

Charges of Mold-Tek Open and satisfied charges registered against the company with MCA.

Citi Bank N.A. : 80.00 cr
Open Charges: 13 Satisfied Charges: 9
Open 177.00 cr
Satisfied 96.10 cr
LenderAmountStatus
Citi Bank N.A.
Creation Date: 09 Jun 2025
10.00 cr Open
Citi Bank N.A.
Creation Date: 09 Jun 2025
20.00 cr Open
Citi Bank N.A.
Creation Date: 09 Jun 2025
10.00 cr Open

Business Activity Principal business activity and turnover mix from MCA filings.

Activity GroupDescriptionTurnover %
ManufacturingPlastic products, non-metallic mineral products, rubber products, fabricated metal products100

Companies With Common Directors Of Mold-Tek Other companies that share directors with this entity, based on MCA and compliance network data.

Financial Ratios of Mold-Tek Profitability, leverage, and liquidity ratios from filed statements. Exact values unlock with your report.

11 years of ratios on record

Profitability, leverage and liquidity ratios require an active report plan.

Net profit margin Debt / Equity Current ratio ROE

Unlock exact ratio values and multi-year insights.

Verified entity values are shown only after access is granted.

Shareholding Pattern of Mold-Tek Ownership and contribution detail from filings. Full breakdown unlocks with your report.

10 shareholder categories on record

Ownership mix and contribution history require an active report plan.

Ownership mix Category breakdown Year-wise pattern Promoter holding

Unlock full ownership and contribution details.

Verified entity values are shown only after access is granted.

Employees and EPFO Compliance at Mold-Tek EPFO establishments, contributions, and headcount history. Full records unlock with your report.

1 establishment linked

Monthly headcount, contribution history, establishment records, and filing compliance require an active report plan.

Monthly headcount PF contributions ECR filing status Establishment history

Employee and EPFO history require an active report plan.

Verified entity values are shown only after access is granted.

GST Compliance of Mold-Tek GST registrations and filing status by state. Full compliance detail unlocks with your report.

State-wise registrations, return filing status, HSN and SAC details, and jurisdiction records require an active report plan.

GSTIN registrations State-wise filing status HSN and SAC details Tax jurisdiction records

GST registrations and filing compliance require an active report plan.

Verified entity values are shown only after access is granted.

Credit Ratings, Litigation & Regulatory Alerts for Mold-Tek Ratings, court records, and regulatory alerts. Full risk detail unlocks with your report.

1 regulatory flag on record

Agency ratings, court records, regulatory events, and entity-specific compliance alerts require an active report plan.

Rating history Court and tribunal cases Regulatory alerts Director-linked violations

Credit ratings, litigation, and regulatory alerts require an active report plan.

Verified entity values are shown only after access is granted.

MSME Payment Delays by Mold-Tek MSME supplier payment delays and filing history. Full amounts unlock with your report.

Amounts outstanding to micro and small suppliers, delay reasons, and MSME-1 filing history require an active report plan.

Outstanding amounts Delay periods and reasons MSME-1 filing history Vendor payment signals

MSME payment history requires an active report plan.

Verified entity values are shown only after access is granted.

MCA Filings & Documents of Mold-Tek Official MCA forms, returns, and filing index. Document access unlocks with your report.

Official forms, annual returns, financial statements, charge filings, and document dates require an active report plan.

Incorporation documents Annual returns and statements Charge filings Complete filing index

MCA filings and documents require an active report plan.

Verified entity values are shown only after access is granted.

Frequently Asked Questions about Mold-Tek Common questions about this company from MCA and profile data. Some answers are limited until unlocked.
Who is the owner of Mold-Tek?
MCA does not publish an "owner" field. Mold-Tek is run by its directors, Srinivas Madireddy, Togaru Dhanrajtirumala Narasimha, Ponnuswamy Ramnath and nine others, with Lakshmana Rao Janumahanti as managing director. It is owned by its shareholders, and the promoter holding is in the shareholding pattern it files with the stock exchanges.
Who are the current board members and directors of Mold-Tek?
Mold-Tek has 12 current directors: Srinivas Madireddy (since May 2018), Togaru Dhanrajtirumala Narasimha (since January 2020), Ponnuswamy Ramnath (since August 2023), Seshu Kumari Adivishnu (since January 2015), Madhuri Venkata Ramani Viswanadham (since March 2020) and Venkateswara Rao Pattabhi (since August 2008), plus 6 more. Lakshmana Rao Janumahanti is the managing director.
What is CIN of Mold-Tek?
The CIN of Mold-Tek is L21022TG1997PLC026542. Reading it left to right: L means it is listed, 21022 is the industry code it registered under, TG is Telangana, 1997 is the year it was registered, PLC is the company type and 026542 is its registration number.
When was Mold-Tek incorporated?
Mold-Tek was incorporated on 28 February 1997 with ROC Hyderabad. That makes it more than 29 years old.
What is the registered address of Mold-Tek?
The registered office on MCA records is 8-2-293/82/A/700, Ground Floor Road No 36, Jubliee Hills, Hyderabad, Telangana - 500033.
What is the current status of Mold-Tek?
MCA shows Mold-Tek as Active, and its last AGM on record was in September 2025.
What is the contact number or email for Mold-Tek?
You can post to its registered office at 8-2-293/82/A/700, Ground Floor Road No 36, Jubliee Hills, Hyderabad, Telangana - 500033 and use its website, https://moldtekpackaging.com.
What industry or business activity is Mold-Tek associated with?
Its MCA filings list the main business as plastic products, non-metallic mineral products, rubber products, fabricated metal products (100% of turnover).
What is paid-up capital and authorised share capital of Mold-Tek?
Paid-up capital is ₹16.61 crore and authorised capital is ₹20 crore, so about 83% of the authorised amount has been issued.
When did Mold-Tek last file accounts and hold an AGM?
The last AGM on record was on 30 September 2025, and the latest balance sheet is for the year ending 31 March 2025.
Where can I see charges and lenders for Mold-Tek?
13 charges against Mold-Tek are still open and nine have been satisfied. Lenders named in the filings include Citi Bank N.A..
Have any directors left Mold-Tek?
Yes, 15 former directors are on record. The most recent to leave were Mytraeyi Janumahanti (September 2021), Ramakrishna Bonagiri (August 2020) and Venkata Neeladri Varma Nadimpalli (September 2019).
Which companies share directors with Mold-Tek?
5 companies share directors with Mold-Tek. Among them are Mold-Tek Technologies Limited, Cgi Simulations Private Limited, Sterlite Infra Limited and 2 more.
What is the turnover or revenue of Mold-Tek?
Based on filed financial statements, the revenue of Mold-Tek for FY 2025 was in the ₹500–1000 Cr range. That is up 12.0% on the previous year. Exact year-wise revenue, profit and balance sheet figures are on the Financial tab.
What is the net worth of Mold-Tek?
For FY 2025, the net worth of Mold-Tek was in the ₹500–1000 Cr range.
How can I get the financial details of Mold-Tek?
The latest accounts on record are for FY 2025. The Financial tab has year-wise profit and loss, balance sheet and ratios, with exact figures after you sign in.
What is the official website of Mold-Tek?
The website on record for Mold-Tek is https://moldtekpackaging.com.
Which company owns moldtekpackaging.com?
moldtekpackaging.com is the website listed for Mold-Tek Packaging Limited in its company records.
Is Mold-Tek registered with any stock exchange in India?
It is listed on both BSE (scrip code 533080) and NSE (symbol MOLDTKPAC).
Mold-Tek - is it listed or unlisted?
Mold-Tek is a listed company, and its CIN starts with L.
What is the ROC code of Mold-Tek?
Mold-Tek is registered with ROC Hyderabad.
What is the company classification of Mold-Tek?
MCA classifies Mold-Tek as: Public Limited Indian Non-Government Company.
Does Mold-Tek have GST registrations on file?
Yes, 11 active GST registrations are linked to Mold-Tek, usually one per state it operates in.

Disclaimer: Data on this page is compiled from public sources as available in our system at the time of the last update and is for general information only. Scores are derived indicators, not credit ratings or advice - please verify from official sources and consult a professional before making any business or financial decision.